Q20 Radio Frequency Receiver, Receiver for Q20 UnderFloor Controller

Technical Specifications:

·       Power supply: 230 VAC 50/60 Hz

·       Frequency: 868 MHz for connecting the receiver

·       Supports wireless connection with two Q20 Controllers

The signal range depends on the wall thickness; recommended distance should not exceed 20 meters

Pairing with the Q20 Controller:

Correctly connect the L-N of the receiver to the power source. When powered correctly, the green LED will remain on.

Press and hold the pairing button on the receiver until LED 2 blinks rapidly.

On the Q20 Central Unit, press the arrow buttons until u arrive to  and the corresponding LED blinks slowly. Press the SET button, and the green LED will blink rapidly. Once the receiver LED stops blinking, pairing is successful. Press SET again briefly to exit.

Repeat the procedure if you want to pair multiple Q20 Units with the same receiver (up to two units).