Q20 Underfloor Heating Automation Kit, Controller for underfloor heating or radiators with distributor, Management and monitoring for 8 zones, Fully Wireless, 4 Q20 Smart Wifi Thermostats, e-Hub included, Phone control, ideal for controlling heat pumps, gas or electric boilers

Premium Wireless Underfloor Heating Automation

Distinct modern design complemented by high construction quality and top-tier features. The Quicksmart Q20 underfloor heating automation kit is an innovative, professional-quality product designed for long-term use and ease of installation and operation.

Quicksmart Automations Quality Guarantee:

• 36-month warranty for Q20 Wireless Automation
• NO MATTER WHAT Guarantee, immediate replacement in case of malfunction
• Products with a minimum lifespan of 10 years
• Product continuity guarantee

The solution we propose, the Q20 underfloor heating automation kit with a multi-zone controller and wireless thermostats with remote phone access via an app, is modern and much more reliable.

Often, thermostats installed at fixed points are not placed in the best locations; for example, they are mounted too high or too low, placed directly in sunlight, or in areas where air currents are present. Moving them is not easy, as they are wired into the walls.

By carefully planning heating programs, monitoring and managing remotely, and customizing by zone according to the family's schedule and specific needs, the product will pay off its initial cost in 3-4 seasons.

The set is designed for underfloor heating systems, but also for centralized radiator systems via a distributor or mixed systems for homes and apartments. It can be used in both newly constructed installations and existing ones.

The Q20 Underfloor Heating Automation Kit contains:

• Multi-zone controller for underfloor heating: 2 zones, 3 zones, 4 zones, up to a maximum of 8 zones, with wireless connection for thermostats and the central unit.
• 4x Q20 Smart Wireless Wifi floor thermostats for 2-8 zones.
• A hub for remote phone control.
• A radio frequency receiver for wireless connection with your central unit.

1. Q20 Underfloor Heating Controller

The central command unit of the Q20 underfloor heating automation system can send and receive control signals for 32-60 actuators from up to 8 wireless thermostats and can control both the boiler and circulation pump. The system works with any distributor and actuator.

Controller functions of the Quicksmart Q20 Underfloor Heating Automation:

• Wireless connection and control with the central unit.
• Wired connection to the central unit (if not opting for wireless).
• Wireless connection with ambient thermostats.
• Compatible with any underfloor heating or radiator heating distributor.
• Selectable heating or cooling mode for heat pumps.
• Allows connection of the same thermostat to multiple zones, up to 8 thermostats and zones.
• Selectable NO or NC actuators, supporting up to 32/60 thermal actuators.
• Adjustable boiler and pump delay time from 0-6 minutes.

Technical Data for the Quicksmart Q20 Controller:

• Power Supply: 230 VAC 50/60 Hz
• Circulation Pump Output: 230V
• Frequency: 868 MHz for thermostat connection
• 8 zones (5 actuators per zone)
• Boiler Output: voltage-free output
• Max. Current: 5A for each output
• Compatible with NC (Normally Closed) or NO (Normally Open) actuators
• Dimensions: 35x118x59.5 mm

2. Q20 Underfloor Thermostat

The Q20 wireless thermostat is designed for managing and monitoring heating and cooling systems in residential homes and commercial locations. It offers state-of-the-art functionalities to improve comfort and energy savings and is made from high-quality materials with attention to detail. It can be used individually to control a single central unit or in complex automation systems like the Q20 Automation Kit.

·        Compatible with gas and electric boilers.

·        Premium construction with a matte finish and top-tier features. Updated UI for the application interface.

·        Remote control via the Smart Life app. Voice control via integration with Alexa or Google Home.

·        Four fully automatic programs or manual settings. App access sharing with family members.

·        Stunning display with mirror effect and touch buttons. The large screen is easy to read with backlighting.

·        The screen displays the set temperature, measured temperature, time, and daily schedule.

·        Thermostats come with two stands: one for wall mounting and one for furniture. Includes USB charger and cable.

Q20 Thermostat Functions:

Temperature Calibration

·        The electronic temperature sensor allows adjustments.
This function is used to calibrate the room temperature displayed by the thermostat if the actual room temperature differs from the displayed one. For example, if the actual room temperature is 21.5°C but the thermostat shows 23°C, you can set this value to -1.5, and then the thermostat will indicate 21.5°C.

Frost Protection

This is the temperature maintained when the thermostat is in frost protection mode. If the room temperature is below 5°C (default), the thermostat will turn on the heating until the room temperature exceeds 5°C.

Differential Switch

This function allows you to increase the thermostat's switching differential. The default value is 0°C, meaning with a set temperature of 20°C, the thermostat will turn on the heating at 19.5°C and turn it off at 20.5°C. With a differential of 0.5°C, the heating will turn on at 19°C and off at 21°C.

Child Lock

When the child lock is ON, the buttons will lock once the backlight turns off. Press the up and down buttons simultaneously for 5 seconds to unlock it for a temporary adjustment.

Open Window Detection (OWD) Function

When the open window detection function is activated in the parameter settings, the system will automatically turn off the heating when it detects a sudden drop in room temperature (2°C in 15 minutes by default). This usually happens when a window or door is opened while the heating is running in that area.

Technical Data for the Q20 Thermostat:

·        Power Supply: 2x AA batteries or USB (5V/1A)

·        Backup memory: EEPROM

·        Maximum voltage/load: 250 VAC/10A

·        Frequency: 868 MHz

·        Switching options: 7 days, 4 periods per day

·        Temperature settings: 5°C - 35°C, in 0.5°C increments

·        Accuracy: +/- 0.5°C

·        Thermostat dimensions: 125x98x23.5 mm

·        IP Protection rating: 20

3. Radio Frequency Receiver

• Power Supply: 230 VAC 50/60 Hz
• Frequency: 868 MHz for connecting the receiver
• Supports wireless connection with more Q20 controllers.

4. Smart e-Hub Gateway for remote control via app

The e-Hub is designed for quick and easy setup to remotely control your thermostats through the Smart Life app.

• Power Supply: 230 VAC 50/60 Hz
• Frequency: 868 MHz
• Internet connection for remote control
• Supports up to 25 underfloor thermostats

QTV20 Radiator Thermostatic Head (optional)

For locations with mixed heating systems (underfloor heating combined with radiators) or for automating radiator heating systems, we present the QTV20 smart thermostatic heads for radiators. When used with the Q20 underfloor heating system, they offer a complete solution for control and automation.

The actuators are purchased separately.
Qsmart electrothermal actuator, NO (normally open) or NC (normally closed), 230V, M30*1.5mm